2003 Mitsubishi Ignition Eclipse Wire Diagram

Show Large Image

With the Metal Knee Bolster removed, you can now get to the Brake Switch and Brake Switch wire above the Brake and all other Under Dash wiring. Show Large Image

Then remove the fifth Philip's Head screw just above the Ignition Switch Tumbler on the Steering column. Show Large Image

To gain access to the Under Dash wiring of this vehicle, you will first need to remove this Under Dash Panel just below the Steering Column. This panel in held in place by (4) Philip Head screws at each corner of the panel. Show Large Image

Before removing the (4) screws that holds this Under Dash panel in place, remove the (2) Philip Head screws that holds the Hood Release to the Under dash panel. By doing so will let you remove this panel and set it aside. Show Large Image

With the Under Dash panel removed, next remove the Metal Knee Bolster, it is held in place by (2) 10mm Bolts, with these bolts removed the Metal Knee Bolster will pull off. Show Large Image

To access the IGNITION SWITCH HARNESS Plug and the TRANSPONDER ANTI-THEFT System on this vehicle, you will need to remove the Lower Steering Column cover. To do this, you will need to remove (5) Philip Head screws. First remove these (4) screws at the bot Show Large Image

With all (5) screws removed, this Lower Column cover will unsnap and pull off, leave the Upper Column cover in place. Show Large Image

With the Lower Column Cover removed, you can now get to the Transponder Antenna Ring around the Ignition Switch Tumbler and the Ignition Switch Harness Plug on the Left side of the Steering Column. Show Large Image

The IGNITION SWITCH HARNESS Plug, is attached to the Ignition Switch on the Left side of the Column. The Ignition Harness Plug is the Lower WHITE Plug with the LIGHT BLUE Plastic cover in this picture. Show Large Image

For this picture we unplugged the IGNITION SWITCH HARNESS, from the Ignition Switch, to get a better picture of the IGNITION wires in this plug. Show Large Image

The (-) LIGHT GREEN/BLACK HORN wire, marked with the RED Clip, is located at the BLACK Plug at the top of the Steering Column, just behind the Steering Wheel, next to the Air bag wires, note the Air bag wires are the YELLOW and the YELLOW/BLACK wires in t Show Large Image

The (+) GREEN/ORANGE BRAKE wire, marked with the BLACK Clip, is located at the Brake Switch that is attached to the top of the Brake Pedal on this vehicle. Show Large Image

The (+) GREEN/WHITE PARKING LIGHT wire, marked with the RED Clip, is located in the Main Harness in the Drivers Kick Panel, heading to the REAR of the Vehicle. Show Large Image

The (-) LIGHT GREEN DOME LIGHT SUPERVISION wire (that is also the DRIVERS DOOR TRIGGER wire), marked with the RED Clip, is located in the Main Harness in the Drivers Kick Panel, heading to the REAR of the Vehicle. Show Large Image

This is a picture of the DRIVERS DOOR HARNESS Plug that exits the Drivers Door and is located in the Drivers Kick Panel. This plug contains both the Lock and the Unlock wires for this vehicle. Show Large Image

The (TYPE B) PURPLE LOCK wire, marked with the BLACK Clip, is located in the LARGE BLACK DRIVERS DOOR HARNESS Plug in the Drivers Kick Panel. Show Large Image

The (TYPE B) LIGHT GREEN/RED UNLOCK wire, marked with the BLACK Clip, is located in the LARGE BLACK DRIVERS DOOR HARNESS Plug in the Drivers Kick Panel.

Source: http://diagrams.marktoonen.nl/index.aspx?MakeID=32&ModelID=16760

Posted by: onorataleifsays.blogspot.com

Berbagi :